Move to the text

Processing example

Oil pressure parts valve body

Valve body
Processing method one pass method of construction 2 process
Materials FC300
Processing diameter φ 13
It is a precision cylinder degree after processing: 1.0μm
      Roundness: A=0 .5μm, B = 0.5μm,
          C = 0.7μm, D = 0.5μm

Oil pressure parts plunger block

Plunger block
Processing method one pass method of construction
Materials FCD600
Hardness HRc52 - 62
Processing diameter φ 14*9 hole
It is a precision cylinder degree after processing: 1.4-2.4μm
      Roundness: 0.6-1.7μm
 
 

Motor parts sleeve

Sleeve
Processing method one pass method of construction
Materials hard alumite (a base material: aluminum)
Processing diameter φ 10
It is precision roundness after processing: 1.0-1.2μm
      An aspect rough degree: Rz0 .8μm
 
 

Motor parts gear

Gear
Processing method mandrel method of construction + one pass method of construction
Materials SNCM220
Hardness Hv720 - 850
Processing diameter φ 20 0-0.011
It is a precision cylinder degree after processing: 1.0μm
      Roundness: A = 0.5μm, B = 0.6μm, C = 0.7μm
 
 

Motor parts rocker arm

Rocker arm
Processing method one pass method of construction
Materials SCM415 cementation quenching
Processing diameter φ 10
It is a precision side rough degree after processing: Rz6.3

Die parts Bush

Bush
Processing method mandrel method of construction + one pass method of construction
zaishitsuchoko
Processing diameter φ 2.755 0-0.01
Take; dai 0.1mm/ diameter
It is a precision side rough degree after processing: Rz0 .8μm
 
 

Housing for the industrial parts air spindle motor

Housing
Processing method one pass method of construction
Materials SUS420
Hardness HRc55
Processing diameter φ 30±0.002
It is a precision cylinder degree after processing: 1.0μm
      Roundness: A=0 .3μm, B = 0.4μm, C = 1.0μm,
          D = 0.4μm, E = 0.3μm
 
 

Industrial parts cylinder

Cylinder
Processing method one pass method of construction + mandrel method of construction
Materials nitriding steel
Hardness HRc60
Processing diameter φ 10±0.005
It is a precision side rough degree after processing: Rz0 .25μm
 
 

Optical component 

Quartz glass
Processing method mandrel method of construction
Materials quartz glass
Processing diameter φ 10
Processing 350mm in length
Take; dai 0.5mm/ diameter
It is a precision side rough degree after processing: Rz0 .8μm (so that there is not the outbreak of the microcrack)
 
About this page contents, I forbid reproduction without permission.
TOYO Co.,Ltd.
〒470-0131
128-1 Mukaida Iwasaki-cho, Nisshin-shi, Aichi
TEL. +81-561-73-3331
FAX. +81-561-74-1268
1.Production sale of the exact processing machine
2.Production sale of the exclusive tool
3.Trust processing of the inside diameter finish product
 
Back to TOP